SL 600 (129.076) V12-6.0L (120.981) (1995)
/v12-6.0l_(120.981)/Page-2028002.png)
Installation note
When installing insert door handle unit so that handle makes contact behind actuating lever on door lock (arrow).
Insert lock cylinder into turning nut on door catch with turning rod; for this purpose turn lock cylinder 90° and fasten (arrows).
After tightening door handle check the small clearance between door handle and actuating lever for door catch, adjust if required.
Adjust this small clearance to 0 - 1 mm by turning eccentric plastic screw.
