SL 600 (129.076) V12-6.0L (120.981) (1995)
Convertible Top Hydraulic Control Unit: Procedures
Removal and Installation of Hydraulic Unit
Preliminary jobs:
Cover above hydraulic unit removed.
Plug connector (a) (A7/5x) ................................................................................................................................................................................. disconnect
Hydraulic lines (b, c, d) ........................................................................................................................................................................................ screw off
NOTE:
Screw plugs onto or into the hydraulic lines and connections on the hydraulic unit immediately.
Nuts (arrows, 3 each) ............................................................................................................................................................................................ screw off
Install in opposite order.
Check for proper function and leakage.
Special tool
Hydraulic line b:
Plug part no.
129 589 00 91 05
Plug part no.
129 589 00 91 04
Hydraulic line c:
Plug part no.
129 589 00 91 08
Plug part no.
129 589 00 91 09
Hydraulic line d:
Plug part no.
129 589 00 91 06
Plug part no.
129 589 00 91 10