SL 600 (129.076) V12-6.0L (120.981) (1995)
6
Screw on nut (6); counterhold camshaft (22) with wrench (15) 104 589 01 0 100 for this step.
7
Fit on armature (4).
The roll pin (arrow) in the armature (4) should be matched with the flat on the control plunger (18).
8
Screw on bolt (3); counterhold armature (4) at the flat (arrow) for this step.
TIGHTENING TORQUE
SPECIAL TOOLS
References, Special Tools