SL 600 (129.076) V12-6.0L (120.981) (1995)
Oil filter housing (1):
Install, pay attention to dowel sleeve (15).
Bolts:
Install according to bolt diagram, screw on until they make contact.
Oil filter housing (1):
Align to gap size "A" (5 mm) relative to timing case cover (24) otherwise the power steering pump cannot be installed.
Bolts of oil filter:
Tighten (25 Nm).
Engine:
Run, check for leaks (step 17).
Note
The oil circulates in the air-to-oil cooler once the thermostat valve in the oil filter housing (1) opens:
See function of oil filter housing.
Engine oil level:
Check, adjust to correct level.
REMOVING, INSTALLING
1
Unplug air conditioning compressor connector (A9x1)