SL 600 (129.076) V12-6.0L (120.981) (1995)
Headlamp Switch: Service and Repair
Exterior Lighting Switch
Preceding work:
Remove cover below instrument panel. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
-
Ground cable at battery - disconnect, connect.
-
Exterior lamp switch control button (1) - pull off, fit on.
-
Bulb (2) - withdraw, insert.
-
Nut (3) - unscrew, screw on.
-
Exterior lamp switch (S1) - turn to the left and take out to the rear, insert from behind and turn to the right
NOTE: Ensure the retaining lugs (arrow) on the exterior lamp switch (S1) are correctly located.
-
Electrical connection (4) - pull off, plug in.