SL 600 (129.076) V12-6.0L (120.981) (1995)
7.
Remove lower body panel from front fenders.
8.
Remove the two fastening bolts (A and B, Figure 15).
9.
Loosen bolt (A, Figure 16) on side of bumper.
10.
Press sides of bumper downward and unscrew bolts (A and B, Figure 17). Position spacers (arrows) between fender and body as shown. Ensure
that the holes align for easier installation.
11.
Finger tighten all bolts and visually inspect for correct alignment. Tighten bolts.