SL 600 (129.076) V12-6.0L (120.981) (1995)
/v12-6.0l_(120.981)/Page-794004.png)
diagram.
NOTES
a. When performing test and adjustment work, the engine rpm should only be raised using the accelerator pedal. If the engine speed is raised via
the control linkage in the engine compartment, the "limp-home" mode will become active and will be registered in the electronic accelerator
malfunction memory as a fault. The ASR malfunction indicator lamp will also come on.
b. If installing an LH control unit from another vehicle, the control unit's self-adaptation feature must first be reset to its mean value (see Control
Module Repair).
c. Note regarding "Test Connection" column:
The numbers indicated in parentheses, for example, (1.23) signify:
1 = Connector 1 on wiring diagram,
23 = Socket 23 on wiring diagram.
Test Step F 31.0
Test Step F 32.0
