SL 600 (129.076) V12-6.0L (120.981) (1995)
15.
Connect black/yellow wire (ACSR sub-harness (1, Figure 13]) to fuse and relay box (F1) fuse 22 (fuse 22 will have a pink/yellow wire on the
power side) at coupling A of terminal 15R.
Note:
^
Refer to ETM model 129, section 00; F1 (fuse and relay box) for fuse box layout.
^
Secure any slack in black/yellow wire using cable ties as needed in fuse and relay box area.
16.
Route passenger seat ACSR sub-harness (1, Figure 14) in wire harness tray located along the right floor area.
17.
Route ACSR wiring harness (1, Figure 15) from harness tray to right side, under carpet and secure to existing harness.
18.
If vehicle is equipped with occupied seat recognition, secure wire (6. Figure 15) which is no longer needed, under passenger seat with cable tie and