SL 600 (129.076) V12-6.0L (120.981) (1995)
/v12-6.0l_(120.981)/Page-1623002.png)
Removing and Installing Parameter Steering (PML) P-Valve (Y10)
-
Mount gear on assembly support 140 589 00 59 00 with two screws and clamp in the vise.
-
Measure Total Friction Torque at steering shaft with friction torquemeter 123 589 02 21 O0 and wrench socket insert 123 589 00 O8 00 by slowly
turning the steering shaft from stop to stop several times.
-
Slacken lock nut (50). Turn adjusting screw (45) 1/4 turn in stages.
-
direction "a" = increases friction torque
