SL 600 (129.076) V12-6.0L (120.981) (1995)
/v12-6.0l_(120.981)/Page-1623004.png)
On steering gears 765.922 and 765.950 (model 202), the sleeve (23j) with two surfaces be detached from the steering shaft.
After adjusting the friction moment first
-
align the clamping slot of the sleeve (23j) of the marking notch of the steering shaft, then...
-
push on sleeve (23j) up to the stop on the steering shaft and secure with new locking ring (23j).
Checking and Adjusting Friction Torque of Steering Gear
Removing and Installing Parameter Steering (PML) P-Valve (Y10)
Removing and Installing Parameter Steering (PML) P-Valve (Y10)
-
With steering gear removed, unscrew P-valve (Y10). Absolute cleanliness is required.
-
Replace the seal (Y10/1).
-
Torque to 70 Nm on installation.
