SL 600 (129.076) V12-6.0L (120.981) (1995)
NOTE: Following installation.
6
Spring link
CAUTION: The rear axle shaft must be horizontal when tightening the nuts
6B Rubber bearing to spring link
NOTE: If necessary after checking, Remove/install spring link rubber mount.
6g
Spring link shield
6j
Remove shock absorber or spring strut at spring link
6k
Torsion bar link rod
6i
Remove/install guide rail at spring link
36
Frame cross-strut
118B Linkage between headlight leveling device and right-hand spring link
-
Vehicles with xenon headlamps only
S83/2, S83/3 Remove/install left or right rear axle roll bar (RB) switch