SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2157001.png)
Aspirator: Testing and Inspection
In - Car Temperature Sensor (B10/4), With Aspirator Blower
Check in-car temperature sensor aspirator blower by placing a small piece of paper (arrow) approximately 1/2 inch square over in-car temperature sensor
(B10/4) vent grille with ignition ON. If there is sufficient ventilation the paper will remain on the vent grille, if not check aspirator blower for voltage
supply and function. The after-run time for the blower motor is greater than six seconds.
