mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Charging System > < Battery Cable|Service and Repair
Page 2
background image

Connect auxiliary power source first if necessary.

-

After opening the vehicle wait for at least 4 minutes before disconnecting the battery otherwise the alarm will be triggered.

3

Connect ground cable

NOTE:  Tighten the nut (5) of the ground line (1) to the specified torque. Perform work described below only when quiescent current retention
unit was not connected.

Nut of ground cable to body - 18 N.m

4

Code radio
-

MB Audio 5 (model 168)

-

Radio Sound 10, 20, 30 and luxury Audio 10 radio D2B networked

-

Becker Mexico .Grand Prix, Europa, Avus

-

Hi-Line, Premium with Bose (model 163)

5

Set time at instrument cluster

NOTE:  If necessary set time at stationary heater timer.

6

Activate steering angle sensor

7

Synchronize tilt/slide sunroof

NOTE:  Open tilt/slide sunroof and hold down switch. Sliding/pop-up roof mechanism moves to end position, pulls back 1/4 turn and stops

8

Synchronize lamella sliding roof

NOTE:  Close lamella roof and keep switch pressed for 5 to 10 seconds.

9

Synchronize power windows

NOTE:  Press power windows switch up to the 1st pressure point and, after reaching the upper end position of the window, keep pressed for a
further 5 seconds.

Charging System > < Battery Cable|Service and Repair