SLK 320 (170.465) V6-3.2L (112.947) (2002)
Special Tools
Shown on engine 112
1
Lubricate thread and bolt head contact surface of conrod bolts with engine oil.
2
Screw in conrod bolts and tighten to step 1.
3
Tighten conrod bolts to step 2.
4
Tighten connecting rod bolts using an angle wrench to step 3.
If no torquing angle wrench is available, the connecting rod screws can be torqued further by the specified angle in a single operation using a
wrench and leverage bar.
Do not use a flexi-rod torque wrench for tightening in order to avoid any angle errors.
BE03.10-P-1000-01D Check Values For Connecting Rod
BE03.10-P-1000-01D Check values for connecting rod
Modification notes