SLK 320 (170.465) V6-3.2L (112.947) (2002)
3
Check vehicle level at rear axle
-
Loosen rear right frame brace and swivel to one side.
-
Place the swivel arm of the measuring device (02) on the inside of the spring link.
-
Position contact arm on the rear axle shaft and read off the plumb value of vehicle level, viewed from the center of the vehicle.
NOTE: On vehicles with ASR, remove bracket (62a) from spring link.
4
Adjust vehicle level at front and rear axles
-
If the vehicle level at the front or rear axle is outside the tolerance, Adjust vehicle level by changing the springs or spring rubber mounts
CAUTION:
-
On vehicles with level control, a vehicle level which is too low must not be corrected by altering the connecting rod of the level
controller (control point)
-
Check function of level control: If OK: Adjust vehicle level by changing the springs or spring rubber mounts.
AR40.20-P-0301A Check Front & Rear Axle With Inclination Instrument and Adjust
Checking Vehicle Level At Front And Rear Axles With Electronic Clinometer And Adjusting If Necessary
Diagram Right