SLK 320 (170.465) V6-3.2L (112.947) (2002)
1
Electrical connection
2
Sensor housing
3
Active ceramic probe body
4
Electrode (inner)
5
Electrode (outer)
6
Heating element
7
Inner, open combustion chamber
8
Protective tube
9
View of electrical connection for O2sensor
1 Sensor heater
2 Sensor heater ground
3 O2 sensor signal ground
4 O2 sensor signal
G3/1
O2 sensor downstream of TWC
G3/2
O2 sensor upstream of TWC
G3/3
Left O2 sensor upstream of TWC
G3/4
Right O2 sensor upstream of TWC
G3/5
Left O2 sensor downstream of TWC
G3/6
Right O2sensor downstream of TWC
Records the residual oxygen in the exhaust gas and sends a signal to the engine control unit.
O2-sensors upstream of the catalytic converter: The O2-sensor signal is needed for
- Lambda control
- Self adaptation of the mixture formation
- Function chain tests.
O2-sensors downstream of the catalytic converter: The O2-sensor signal is needed for
- Two-sensor control (USA) and EURO3/4
- Monitoring catalytic converter efficiency
O2 Sensors, Design