SLK 320 (170.465) V6-3.2L (112.947) (2002)
/v6-3.2l_(112.947)/Page-1946001.png)
Control Arm Bushing: Procedures
Remove/install Spring Link, Replace Rubber Mount
Shown On Model 129
Shown On Model 210
CAUTION: Installation: Replace self-locking nuts
DANGER:
-
Risk of fatal accident from vehicle slipping or toppling off the lift platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
NOTE: Remove and install rear spring
Adjust roll bar switch
