SLK 320 (170.465) V6-3.2L (112.947) (2002)
The reverse and parking lock solenoid (Y66/1) is actuated via the ETC control module (N15/3) and moves the lever (69a) in the direction of the cam
(69b) so that the shift shaft (66) is blocked. When de-energized, the support lever (69c) holds the lever (69a) in position to prevent it from engaging by
itself when exposed to severe shocks.
GF27.60-P-5103-04GB R/P Lock, Function
GF27.60-P-5103-04GB R/P lock, function
-
TRANSMISSION 722.6 in MODELS 163, 170, 202, 208, 210
-
with touch shift
Component Identification
Function of R lock
Above a speed of approx. 10 km/h the R/P locking solenoid (89) is actuated by the electronic selector lever module control module (N15/5). The R/P
lock lever (90) is turned to the lock position (shift from "N" to "R").
The tab on the lock lever (R lock) (90c) locks (R-lock (69c) the locking disc (69). The selector lever (80) cannot be shifted into selector lever position
R".
Component Identification
Function of P lock
The selector lever position "P" is locked whenever the R/P locking solenoid (89) is not actuated by the electronic selector lever module control
module (N15/5). The prerequisites for this are as follows:
^
No voltage supply to the electronic selector lever module control module (N15/5)
^
Brake pedal not depressed.