SLK 320 (170.465) V6-3.2L (112.947) (2002)
If the sensor (020a) is not positioned horizontally on the rear propeller shaft (2), the error message "Y positional error - sensor ??" appears on the
display. The measured angle cannot be saved.
Shown on model 203, 209
Component Identification
Show on model 230
Measured Values Screen For Angle 3: Display E.G. 2.76 Degrees
The value measured is shown on the display.
7
Press SAVE button. The values are saved.
Measured values screen for angle 3: display 3.g. 2.76 degrees
Confirmation Screen
A confirmation message appears briefly.
Confirmation screen