SLK 350 (171.458) V6-3.5L (272.969) (2009)
Material:
Water base, highly resistant to stone impact
Processing method:
ESTA
Coating thickness:
20 to 27 microm
Intermediate evaporation:
70 °C object temperature, 5 min
Baking conditions:
155 °C, 15 min
Function
The filler coat thickness has been reduced by using new materials. The use of less material means better environmental compatibility with the same good
material characteristics:
^
The filler meets the prerequisites for good spreading and good visual properties for the top coat.
^
The considerable flexibility of the filler provides good stone impact resistance over the entire paint structure in spite of the thin coating, even at
low temperatures.
^
Compensating for small blemishes.