Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898) (2010)
The quantity of solder (4) is inadequate. Lead of wire (1) is not completely surrounded. Single wires are not incorporated by the solder (4).
AH00.19-P-1000-11A Notes on Cable Protection
AH00.19-P-1000-11A Notes On Cable Protection
An attempt should be made to restore the cable protection to its original condition after all repairs to wiring harnesses.
In areas exposed to particularly high stresses (e.g. dampness, scouring), additional safety precautions may however be required.
Perform the following measures depending on application:
Protection of repair area with heat-shrinkable tube
Protection of repair point by corrugated hose.
Protect repair point by wrapping with fabric tape