mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Shop Manual Revisions|Page 1619 > < Shop Manual Revisions|Page 1617
Page 2
background image

1. Remove Thermactor pump drive belt, then the fan and water pump pulley.
2. Remove alternator drive belt, then drain cooling system and remove upper radiator hose.
3. Remove crankshaft pulley, then the thermostat housing and gasket.
4. On models equipped with power steering, disconnect power steering pump from bracket and position aside.

Shop Manual Revisions|Page 1619 > < Shop Manual Revisions|Page 1617