Capri L4-1597cc 1.6L DOHC (1992)
Output Shaft: Service and Repair
DISASSEMBLE
Fork Assembly
1. Remove shift fork assembly from mainshaft, then position shift fork assembly.
2. Disassemble 1-2 shift fork and interlock sleeve, then the 3-4 shift fork and interlock sleeve from shaft.
Input Gear Shaft Bearing Removal
3. Remove input gear shaft front, rear and main bearings by pressing off shaft with bearing puller attachment tool No. D84L-1123-A, or equivalent.
4. Remove third and fourth gears and clutch hub from mainshaft by pressing shaft out.
5. Install bearing puller attachment tool No. D84L-1123-A, or equivalent, onto third gear, positioning lips of tool between two sets of teeth.
6. Install shaft protector tool No. D80L-625-3, or equivalent, on end of main shaft.
