Capri L4-1597cc 1.6L DOHC Turbo (1991)
FORM 1863/64
Submit 1864 claims using DWE for all completed vehicles. You may use your original 1863 for your record file copy.
WARRANTY AND POLICY MANUAL
See Section 6.3 pages 5 through 8 of your Warranty and Policy Manual for claims preparation.
Attachment II - Labor and Parts Information
ATTACHMENT II
SAFETY RECALL 91S22
Automatic Transmission Oil Cooler Hose And Clamp Replacement
LABOR ALLOWANCES
Install New Transmission Cooler Hose and Clamps
0.6 Hrs. - Insert in Box "B" on Form 1864
Administrative Allowance
0.1 Hrs.
NOTE:
Add 0.1 hour Administrative Allowance to the total repair time.
PARTS REQUIREMENTS
Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.
Parts prices current until next issue of Master Price Book. For latest prices, check or call:
*
Order Processing Center, DOES II, updated Price Book.
Attachment III - Technical Instructions
ATTACHMENT III
SAFETY RECALL 91S22
AUTOMATIC TRANSMISSION OIL COOLER HOSE AND CLAMP Replacement
TECHNICAL INSTRUCTIONS
1.
Raise car hood.
2.
Disconnect upper transaxle cooler hose on transaxle.
3.
Raise car on hoist and remove splash shields (both sides).
4.
Remove transaxle oil cooler hose (see figure A) at radiator.
*** NOTE ***
CLEAN BOTH HOSE CONNECTIONS (AT RADIATOR AND TRANSAXLE) (BE SURE THEY ARE FREE FROM ALL TRACES OF OIL
AND ARE DRY).
5.
Install new hose identified with a green stripe to radiator. Use new clamp. (CAUTION DO NOT USE ANY LUBRICANT ON NEW HOSE
DURING ASSEMBLY)
NOTE
NO SUBSTITUTE CLAMPS ARE TO BE USED. CLAMPS MUST BE TORQUED USING A TORQUE WRENCH.
6.
Torque clamp to 4 N-m (35 in.lbs.).
7.
Reinstall splash shields (both sides).