Cougar L4-122 2.0L DOHC VIN 3 SFI (1999)
2. Unscrew the blanking plug.
-
(if necessary) Insert the special tool.
3. Position cylinder No.4 to "valves overlap" and install the special tool.
1. Hold the camshafts by the hexagon using an open-end wrench and turn them in the direction of engine rotation.
2. Slide the special tool onto the ends of both camshafts.
4. CAUTION: Do not rotate the crankshaft; as necessary check that it is still resting against the timing pin.
Note: design WITH lower idler pulley shown (built up to 06/1999).