mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Recall - Battery Cable Routing Inspection|Page 6096 > < Recall - Battery Cable Routing Inspection|Page 6094
Page 5
background image

3.

Inspect the entire length of the battery positive cable and the connection at the B+ terminal as follows. See Figure 1.

a.

Check the cable insulation for chafing or gouging (possible contact with alternator or power steering line).

b.

Check the cable and rubber cover for signs of damage (burnt or melted).

c.

Lift up the rubber cover and check the B+ terminal for a loose connection or signs of arcing.

^

If any of the above damage is found, proceed to Battery Positive Cable Replacement.

^

If no damage is found, proceed to Battery Positive Cable Routing.

BATTERY POSITIVE CABLE ROUTING

CAUTION

A routing clip mounting stud is located on the back of the alternator at the two (2) o'clock position on all late 2000 model vehicles. Some 1999 and
early 2000 models may have this mounting stud if they are equipped with a replacement alternator. All vehicles with this mounting stud MUST have
a routing clip installed on the stud.

Recall - Battery Cable Routing Inspection|Page 6096 > < Recall - Battery Cable Routing Inspection|Page 6094