Cougar L4-122 2.0L DOHC VIN 3 SFI (1999)
25. NOTE: When the tic-rod end is separated from the wheel knuckle the ball joint seal should be protected to prevent damage.
Using the special tool, separate the right-hand tie-rod end from the wheel knuckle.
26. Remove the front exhaust hanger insulator.
Vehicles With Automatic Transaxle
27. Detach the rear support insulator.
Vehicles With Manual Transaxle
28. Remove the rear support insulator center bolt.
All Vehicles
29. Lower the subframe.