Cougar/XR7 V8-4.6L VIN W (1997)
NOTE: This will position crankshaft at top dead center (TDC).
13. Install timing chains.
CAUTION: Timing chain procedures must be followed exactly or damage to valves or pistons will result.
14. Inspect and replace crankshaft front seal (6700) and engine front cover as necessary.
15. Apply a 8-12 mm (0.32-0.47 inch) bead of Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification
WSE-M4G323-A6 in locations shown.
NOTE: Prior to applying sealer, clean sealing surfaces with Metal Surface Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification
WSE-M5B392-A, to remove all residue that may interfere with the sealer's ability to adhere.
