Cougar/XR7 V8-4.6L VIN W (1997)
15. With a suitable C-clamp around the timing chain tensioner arm and timing chain guide, remove all slack from timing chain. Use caution not to
bend the timing chain guide.
16. Remove lock pins from timing chain tensioners and make sure all timing marks are aligned.
17. Using Cam Positioning Tool Adapters T92P-6256-A and Cam Positioning Tool T91P-6256-A, align camshaft, tighten camshaft sprocket bolt to
110-130 Nm (81-95 ft. lbs.).
18. Install Rotunda Dial Indicator with Bracketry 014-00282 or equivalent in cylinder No.1 spark plug hole. Check that camshaft is at maximum lift
for the intake valve at 114 degrees after top dead center (TDC).
NOTE: If not at maximum lift, loosen camshaft sprocket bolt and repeat Steps 12-15.
19. Remove Cam Positioning Tool Adapters T92P-6256-A and Cam Positioning Tool T91 P-6256-A and Crankshaft Holding Tool T93P-6303-A.
20. Install engine front cover, oil pan and valve covers.
21. Start engine and check for leaks and proper operation.