Cougar/XR7 V8-4.6L VIN W (1997)
Control Assembly: Service and Repair
With Semi Automatic Temperature Control
Climate Control Assembly Bulbs
Removal
1. Remove control assembly.
2. Remove two screws on cover of SATC assembly.
3. Remove bulb holders and replace illumination bulbs as required.
Installation
1. Follow removal procedure in reverse order.
Control Assembly, HVAC
Radio Removal Tool
Special Service Tool(s) Required
Removal
1. Disconnect battery ground cable.
2. Insert Radio Removing Tool T87P-19061-A in retaining clip.
3. Apply a side load away from the control to disengage clips.
4. Pull the A/C control from the instrument panel opening and disconnect the wire connectors from the control assembly.
5. Disconnect the vacuum harness.
Installation
1. Connect the wire connectors and the vacuum harness.
2. Position the A/C control in the instrument panel opening. Engage it in the track in the instrument panel and push it in until it latches firmly in