mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Vehicle Lifting|Locations|Page 2268
Page 2
background image

STILL ON THE GROUND COULD CAUSE THE VEHICLE TO MOVE.

CAUTION:

-

The service jack provided with the vehicle is only intended to be used in an emergency for changing a deflated tire. Never use the service Jack to
hoist the vehicle for any other service. Refer to the Owner Guide when using the jack supplied with the vehicle.

-

Do not attempt to use Jack pressure on either the front bumper or the rear bumper of any utilized vehicle.

-

Never allow hoist or jacks to contact axle housing, halfshafts or Constant Velocity (CV) joints.

When using a floor jack, the vehicle may be raised at several locations. The front of the vehicle may be lifted by positioning the floor jack under the
center of the No. 2 crossmember. The front, as well as either side of the rear end, may be lifted by positioning the floor jack under the rocker flange at
the contact points used for the service jack supplied with the vehicle.

To lift the rear of the vehicle, place jacks at rear frame lift points.

Engine, Cooling and Exhaust > < Vehicle Lifting|Locations|Page 2268