Cougar/XR7 V8-4.6L VIN W (1997)
Throttle Body: Description and Operation
PURPOSE
The throttle body provides control of engine air flow.
OPERATION
-
A cam lever and accelerator cable rotates the throttle shaft from idle to Wide Open Throttle (WOT) position.
-
The plate position at idle is factory set by the lever contacting a throttle return control screw. The head of the screw is removed to make the idle
plate set permanent. DO NOT attempt to adjust idle/minimum plate setting with the throttle return control screw.
-
The throttle body airflow is factory set by the idle air adjust needle (trim screw) within the throttle body casting. DO NOT attempt to adjust.
-
Throttle body idle airflow provides minimum engine airflow while the Idle Air Control (IAC) valve provides supplemental engine airflow to
maintain the desired engine idle speed.
-
The WOT plate position which is obtained when the lever contacts the throttle body casting.
-
The Throttle Position (TP) which provides an electrical signal which is used as an input to the Powertrain Control Module (PCM).
-
The throttle body has a sealant which is applied to the downstream side of the throttle body plate and bore to reduce plate-to-bore leakage.
Cleaning may remove sealant. It should NOT be cleaned.