mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Steering Column Cover > < Arming and Disarming|Page 8130
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Prove Out System

Turn the ignition switch from OFF to RUN and visually monitor the AIR BAG indicator with the air bags installed and connected. The AIR BAG
indicator will light continuously for approximately six seconds and then turn off. If an air bag system fault is present, the AIR BAG indicator will either:

-

Fail to light.

-

Remain lit continuously.

-

Flash.

The flashing may not occur until approximately 30 seconds after the ignition switch has been turned from OFF to RUN. This is the time required for the
air bag diagnostic monitor to complete testing of the air bag system. If the AIR BAG indicator is inoperative and an air bag system fault exists, a tone
will sound in a pattern of five sets of five beeps. If this occurs, the AIR BAG indicator will need to be serviced before diagnosis can be continued.

Steering Column Cover > < Arming and Disarming|Page 8130