Cougar/XR7 V8-4.6L VIN W (1997)
9. Install the 1-2 accumulator assembly and spring to case. Install cover and seal assembly. Install retaining ring.
10. Install main control valve body.
11. Install fluid filter and grommet.
12. Clean, inspect and install pan-to-case gasket and transmission pan. Tighten all bolts to 12-15 Nm (9-11 ft. lbs.).
NOTE: Transmission pan-to-case gasket is reuseable if not damaged.
13. Install transmission shift linkage to manual control lever
14. Pour 4.7 liters (5 quarts) of Motorcraft MERCON or MERCON V (ATF) Transmission Fluid or equivalent FORD approved fluid into fluid filler
tube.