Cougar/XR7 V8-4.6L VIN W (1997)
12. Install rear axle differential rear insulator bolts in axle housing cover mount. Tighten to 108-136 Nm (80-100 ft. lbs.).
13. Align marks on driveshaft centering socket yoke and rear axle universal joint flange. Install retaining bolts. Tighten to 95-130 Nm (70-95 ft. lbs.).
14. Fill rear axle housing with SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or -KL or equivalent meeting Ford specification
WSP-M2C197-A to 6 mm (1/4 inch) below the bottom of filler hole.
15. Install filler plug. Tighten to 20-41 Nm (15-30 ft. lbs.).
16. Lower vehicle.