Cougar/XR7 V8-4.6L VIN W (1997)
10. While holding rear axle universal joint flange with Companion Flange Holding Tool T78P-4851-A, remove pinion nut.
11. Remove rear axle universal joint flange.
CAUTION: The rear axle universal joint flange must never be hammered on or assembled with power tools.
NOTE: If required, use Companion Flange Remover T65L-4851-B.
12. Place a drain pan under the rear axle housing. Position screwdriver under flange of rear axle drive pinion seal and strike with hammer to wedge
screwdriver blade between metal flange of rear axle drive pinion seal and rear axle housing.
CAUTION: Do not damage rear axle housing.