Cougar/XR7 V8-4.6L VIN W (1997)
10. Remove windshield wiper adapter and connecting arm clip by lifting and sliding off wiper motor arm. Remove wiper linkage drive arm.
11. Remove the three retaining bolts and remove windshield wiper motor from the windshield wiper assembly.
NOTE: Check location of support bracket on windshield wiper assembly.
INSTALLATION
1. Position windshield wiper assembly in cowl top panel and install retaining bolts and nut. Tighten bolts and nut to 10-14 Nm (89-124 Lb-In).
CAUTION: Before installing the windshield wiper pivot arm and windshield wiper blade assemblies to the windshield wiper pivot shaft, cycle
windshield wiper motor and turn off multi-function switch to ensure that the windshield wiper pivot shaft are in the park position.
2. Install wiper linkage drive arm to wiper motor arm pin. Install clip until it snaps into place.
3. Install RH cowl vent screen. Install LH cowl vent screen.