Grand Marquis V8-4.6L Flex Fuel (2010)
Fire Suppressor Manifold: Service and Repair
Fire Suppression Manifold
NOTE: LH side shown, RH side similar.
Removal and Installation
1. Remove the fire suppressor. For additional information, refer to Fire Suppressor See: Service and Repair/Removal and Replacement.
2. Remove and discard the 5 fire suppression manifold bolts.
-
NOTE: Apply the threadlock material provided in the new manifold kit when installing the new bolts.
To install, tighten to 3 Nm (27 lb-in).
3. NOTE: In the event of a fire suppression system deployment, new fire suppression manifolds must be installed.
Remove the fire suppression manifold.
4. To install, reverse the removal procedure.
