Grand Marquis V8-4.6L Flex Fuel (2010)
-
Tighten to 10 Nm (89 lb-in).
9. Connect the throttle control and the TP sensor electrical connectors.
10. Install the coolant thermostat. For additional information, refer to Cooling System &/or Engine Block Heater.
11. Install the generator bracket and the 4 bracket bolts.
-
Tighten to 10 Nm (89 lb-in).
12. Connect the generator electrical connector.
13. Attach the 2 generator wiring harness retainers to the generator bracket.
14. Connect the EVAP canister purge valve hoses to the TB and the EVAP canister purge valve. For additional information, refer to Fuel Delivery and
Air Induction.
15. Connect the intake manifold vacuum hose to the TB spacer.
16. Connect the EGR system module vacuum and electrical connectors.
17. Connect the PCV tube quick connect coupling to the TB spacer. For additional information, refer to Fuel Delivery and Air Induction.
18. Connect the brake booster vacuum hose to the intake manifold.
19. Install the heater hose and spring clamp.
20. Connect the fuel rail pressure and temperature sensor vacuum and electrical connectors.
21. Connect the 8 fuel injector electrical connectors.
22. Install the wire harness retainer to the rear of the intake manifold.
23. If equipped, attach the wire harness retainer to the intake manifold crash bracket.
24. Install the wiper mounting arm and pivot shaft. For additional information, refer to Wiper and Washer Systems.
25. Connect the fuel spring lock coupling. For additional information, refer to Fuel Delivery and Air Induction.
26. Install the ACL and outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
27. Connect the battery ground cable. For additional information, refer to Battery.
28. Fill and bleed the engine cooling system. For additional information, refer to Cooling System &/or Engine Block Heater.
29. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Vehicle Jacking and Lifting. Failure to follow these instructions may result in serious personal injury.
If equipped with a fire suppression system, repower the system.
