Grand Marquis V8-4.6L Flex Fuel (2010)
Air Bag Deactivation Indicator: Service and Repair
Passenger Air Bag Deactivation (PAD) Indicator
1. NOTE: Ignition must be OFF if disconnecting the Passenger Air Bag Deactivation (PAD) indicator electrical connector. Otherwise, a DTC will be
set in the Restraints Control Module (RCM) memory and must be cleared before releasing the vehicle.
Turn the ignition OFF and wait at least one minute.
2. Separate the RH instrument panel trim panel.
-
Pull out to release the retaining clips.
-
Slide the RH instrument panel trim panel slightly to the right, aligning the keyway.
-
Pull out, separating the RH instrument panel trim panel.
3. Disconnect the electrical connector, release the retainers and remove the PAD indicator.
4. To install, reverse the removal procedure.
