Grand Marquis V8-4.6L Flex Fuel (2010)
No
REFER to Steering Column to diagnose the input from the ignition switch.
-------------------------------------------------
AE4 CHECK THE TRANSMISSION GEAR INPUT
-
Enter the following diagnostic mode on the scan tool: PCM DataLogger.
-
Monitor the PCM transmission gear status PID (TR) while placing the gear selector lever through all positions.
-
Does the PID agree with the gear selection?
Yes
GO to AE5.
No
REFER to Automatic Transmission/Transaxle &/or Transmission Control Systems to diagnose the transmission range input.
-------------------------------------------------
AE5 CHECK THE LCM FOR DRL CONFIGURATION
-
Enter the following diagnostic mode on the scan tool: LCM Module Programming.
-
Check the LCM configuration and make sure the DRL feature is enabled.
-
Is the LCM DRL configuration enabled?
Yes
INSTALL a new LCM. REFER to Body Control Systems. TEST the system for normal operation.
No
ENABLE the DRL configuration. TEST the system for normal operation.
-------------------------------------------------