mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Relays and Modules - Lighting and Horns > < Initial Inspection and Diagnostic Overview|Page 6811
Page 5
background image

-

Ignition OFF.

-

Disconnect: LCM C2145d.

-

Ignition ON.

-

Do the exterior lamps continue to illuminate?

Yes

REPAIR circuit 14 (BN) for a short to voltage. TEST the system for normal operation.

No

GO to Q5.

-------------------------------------------------
Q5 CHECK FOR CORRECT LCM OPERATION

-

Ignition OFF.

-

Disconnect all the LCM connectors.

-

Check for:
-

corrosion

-

damaged pins

-

pushed-out pins

-

Connect all the LCM connectors and make sure they seat correctly.

-

Operate the system and verify the concern is still present.

-

Is the concern still present?

Yes

INSTALL a new LCM. REFER to Body Control Systems. TEST the system for normal operation.

No

The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector.

-------------------------------------------------

Relays and Modules - Lighting and Horns > < Initial Inspection and Diagnostic Overview|Page 6811