mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Tail Lamp > < Spot Lamp, LH Side|Page 6923
Page 2
background image

If the key does not align with the keyway, the exterior tube cannot be properly reinserted into the spotlamp housing.

Remove the spotlamp.

1. Loosen the set screws.

2. Remove the spotlamp housing from the exterior tube.

3. Remove the O-ring.

4. Remove the nylon bushing.

7. To install, reverse the removal procedure.

Tail Lamp > < Spot Lamp, LH Side|Page 6923