Grand Marquis V8-4.6L Flex Fuel (2010)
3. Disconnect the Transmission Range (TR) sensor connector.
4. Remove the bolts and remove the TR sensor.
Installation
1. Install the TR sensor and loosely install the bolts.
2. NOTE: The manual control lever must be in the NEUTRAL position.
Using the TR Sensor Alignment Gauge, align the TR sensor slots. The TR Sensor Alignment Gauge is designed to fit snugly.
3. NOTICE: Tightening one screw before tightening the other may cause the Transmission Range (TR) sensor to bind or become damaged.
Tighten the screws in an alternating sequence.
-
Tighten to 9 Nm (80 lb-in).
