Grand Marquis V8-4.6L Flex Fuel (2010)
4. Connect the driver seat side air bag module electrical connector, located at the lower rear of the seat cushion pan.
5. Remove the Restraint System Diagnostic Tool from the passenger seat side air bag electrical connector.
6. Connect the passenger seat side air bag module electrical connector, located at the lower rear of the seat cushion pan.
7. Disconnect the passenger air bag module jumper harness from the passenger air bag module electrical connector on the vehicle wiring harness.
8. Separate the locking inserts and remove the Restraint System Diagnostic Tool from each of the passenger air bag module jumper harness electrical
connectors.
9. NOTICE: The passenger air bag module jumper harness electrical connectors are unique and cannot be reversed when connected to the
passenger air bag module. Match the electrical connector key to the keyway in the passenger air bag module. Do not force the electrical
connectors into the passenger air bag module. Failure to follow this instruction may result in component damage or system failure.
