Grand Marquis V8-4.6L Flex Fuel (2010)
Windshield: Procedures
Glass Reseal - Windshield
1. Remove the cowl panel grille.
2. Remove the screws and LH and RH sun visors and clips.
3. Position the LH and RH front door weatherstrips aside.
4. Remove the LH and RH A-pillar trim panels.
5. If equipped, remove the overhead console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
6. If equipped, remove the roof opening panel headliner retainer.
7. Partially lower the front portion of the headliner and block with a suitable material.
8. Clean the edge formed by the existing urethane adhesive and the glass on the inside at the top and sides and outside on the bottom of the
windshield with glass cleaner.
9. Cut the urethane adhesive applicator tip to specification.