Grand Marquis V8-4.6L SOHC VIN W (2005)
3. Remove the spring lock coupling spring with a small hooked wire.
Connect
1. Install the spring lock coupling spring.
2. Lubricate the inside of the coupling with PAG oil.
NOTICE: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in
intermittent leakage during vehicle operation.
3. Install the O-ring seals.
4. Connect the spring lock coupling fittings with a twisting motion until the spring lock coupling spring snaps over the flared end of the female
fitting.
5. Install the spring lock coupling clip.