Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Fuel Level Sensor: Service and Repair
FUEL PUMP MODULE
Removal and Installation
1. WARNING: If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
Remove the fuel tank.
2. Disconnect the pressure transducer electrical connector on the top rear corner of the fuel tank and release the 2 harness retainers from the tank.
3. Clean the area around the fuel pump mounting flange.
4. CAUTION: The fuel pump must be handled carefully to avoid damage to the float arm and the filter.
Remove the 6 bolts and the fuel pump.
