Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Alignment: Service and Repair
Camber and Caster Adjustment
Camber and Caster Adjustment
Camber
1. WARNING: The electrical power to the air suspension system must be turned off prior to hoisting, jacking or towing an air suspension
vehicle. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during
these operations. Failure to follow these instructions may result in personal injury.
If equipped, turn the air suspension service switch to the OFF position.
2. WARNING: If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
Using alignment equipment and the manufacturer's instructions, measure the camber and caster settings.
3. NOTE: Camber adjustment can effect caster and toe settings.
If necessary, remove and discard the cam bolt retainer flag.
4. Loosen the cam bolt nut.
5. Rotate the cam bolt to adjust camber.
