Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Wiper Motor Linkage: Service and Repair
WIPER MOUNTING ARM AND PIVOT SHAFT
Removal and Installation
1. Remove the cowl grille.
2. Remove the 2 nuts and position the evaporative emission canister purge valve aside.
-
To install, tighten to 6 Nm (53 lb-in).
3. Remove the 6 bolts and position the wiper mounting arm and pivot shaft aside.
-
To install, tighten to 12 Nm (9 lb-ft).
4. Disconnect the windshield wiper motor electrical connector.
5. Disconnect the windshield washer hose and remove the wiper mounting arm and pivot shaft.
6. To install, reverse the removal procedure.